Government Contract | Florida
Material Lift - Autoquip #FLMC-2, Maintenance

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information

Bid Alert No: 00000437984

Bid Title: Material Lift - Autoquip #FLMC-2, Maintenance

Agency Bid No. Title: 15-2474BLS

Received Date: 12/11/2015

Close Date: 01/05/2016

Purchase Type: 12 months for term

Delivery Point:

Delivery Date: Not Stated

Special Notices: Questions Due By 12/21/2015 03:00 PM


Specifications include, but are not limited to:It is the intent of Manatee County to establish a single agreement to procure, scheduled maintenance consisting of labor, materials, supervision, tools equipment, supplies, transportation and any other requirements (minus parts) for one (1) Autoquip model #FLMC-2, 3-stop material lift, and also to identify and submit written report on existing or potential problems. In addition, the County would like to procure repair services for various hydraulic dock lifts and / or hydraulic compactors throughout the County SCOPE OF MAINTENANCE AND SERVICE Annual Maintenance - Autoquip Material Lift The work provided by the quoter shall consist of furnishing all materials, labor, supervision, tools, equipment, supplies, transportation and other requirements to provide the Material Lift in accordance with the most current recommendations of the American Society of Mechanical Engineers (ASME) and the American National Standards Institute (ANSI) B20.1 . Work shall be based on the annual (12 month) Routine Maintenance Inspection checklist recommended by the manufacturer. Gear oil shall be changed every 24 months per the manufacturers' maintenance schedule. SPECIFIC DUTIES Quoter shall follow the manufacturer routine maintenance schedule and checklist. Below is the Schedule from the manual for the FLMC-2 lifts. This shall be considered the minimum standard. ROUTINE MAINTENANCE Inspection List - Every 12 Months (4,000-5,000 hours of operation): 1. Conduct a full inspection of the unit by using the comprehensive Inspection Checklist 2. Check the gear oil level in the gear reducer. Gear oil shall be flush with the bottom threads of the appropriate check plug. The fill and breather holes will be the top hole on one side and the fluid check hole will be a plug about half way up on the gear reducer. Use an ISO 220 grade EP gear oil for a temperature range of +104 degrees F to +32 degrees F. Use ISO 150 grade EP gear oil for a temperature range of +77 degrees F to +5 degrees F

Bid Related Documents

Download Document


Download Amendment

Product Code: 92947

Agency Information

Issuing Agency: County of Manatee

State: Florida

Agency Type: State and Local

Contact: Bonnie Sietman, Purchasing Division Financial Management Department, 1112 Manatee Avenue West, Suite 803, Bradenton, Florida, 34205

Phone: 941-749-3046

Fax: 941-749-3034




FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing