Government Contract | Texas
MANNING HALL ROOF REPLACEMENT

Bid Information


Bid Alert No: 00000601673

Bid Title: MANNING HALL ROOF REPLACEMENT

Agency Bid No. Title: B600026

Received Date: 06/16/2016

Close Date: 07/14/2016

Purchase Type: Not Stated

Delivery Point:

Delivery Date: Not Stated

Specifications

Specifications include, but are not limited to:Install tapered insulation under area of roofing to conform to slopes indicated.G. Install insulation with long joints of insulation in a continuous straight line with end jointsstaggered between rows, abutting edges and ends between boards. Fill gaps exceeding 1/4inch with insulation.1. Cut and fit insulation within 1/4 inch of nailers, projections, and penetrations.H. Install one or more layers of insulation under area of roofing to achieve required thickness forrequired R values specified elsewhere. Where overall insulation thickness is 2 inches orgreater, install 2 or more layers with joints of each succeeding layer staggered from joints ofprevious layer a minimum of 6 inches in each direction.I. Trim surface of insulation where necessary at roof drains so completed surface is flush anddoes not restrict flow of water.J. Install tapered edge strips at perimeter edges of roof that do not terminate at vertical surfaces.K. Adhered Insulation: Install each layer of insulation and adhere to substrate as follows:1. Set each layer of insulation in a solid mopping of hot roofing adhesive.L. Due to the extreme low slope of the new tapered insulation system extra care shall beexercised to ensure that no ponding occurs once the roof system is complete.

Product Code: 91473

Agency Information


Issuing Agency: Texas A&M University - Kingsville

State: Texas

Agency Type: State and Local

Contact: Procurement Office, MSC 212, Room 121 College Hall, Kingsville, Texas, 78363

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW