Government Contract | South Carolina
LED Warning Lights

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information


Bid Alert No: 00000411443

Bid Title: LED Warning Lights

Agency Bid No. Title: 5400010413

Received Date: 11/05/2015

Close Date: 11/17/2015

Purchase Type: Not Stated

Delivery Point: Columbia, South Carolina

Delivery Date: Not Stated

Special Notices: Questions Due By 11/09/2015 12:00 PM, Bidder Preregistration

Specifications

Specifications include, but are not limited to:SPECIFICATIONS FOR LIGHT, WARNING, LED, BEACON, AMBERSCDOT Spec. No. 136944.09 03/05/15DESCRIPTION: Light, warning, LED, beacon, double flash, anodized spun aluminum case, flanged die-cast aluminum base, and amber lens. The light shall be heavy-duty with regular profile and constructed for rugged use. The light shall be suitable for mounting on the roof of vehicles, roof mount bars, and on other types of equipment. The strobe warning light shall be a Star model 257HTAL-A or equal.REQUIREMENTS: The light shall meet SAE J1318 Class 1 standards. The light shall consist of an anodized spun aluminum case with a flanged base made of Die-cast aluminum. The base shall be attached to the case with at least three (3) self-tapping screws to provide easy access to internal components, without having to remove the base from its mounting. The light shall consist of a fresnel amber lens made of virgin lexan polycarbonate and a clear outer lexan dust cover, and the lens shall be attached to the case with at least four (4) self-tapping screws. The lens shall meet SAE J575 section 3.2.2 for color requirements. The light shall consist of an epoxy encapsulated power supply and must be equipped with an automatic photocell. A top mount internal ambient light shield must be provided between the amber lens and the dust cover. All wiring shall be a minimum of 18 ga. and rated to a minimum 105 degrees C.DIMENSIONS AND MOUNTING: The minimum dimensions of the light shall be 8 inches in height and 6 inches in diameter. The base shall be suitable for mounting on the roof of vehicles, roof mount bars, and threaded pipe mounts. The base shall have a inch female NPT thread fitting for pipe mounting. The unit shall include all mounting hardware required to provide a secure and weather resistant mounting and include a sealing gasket.SPECIFICATIONS FOR LIGHT, WARNING, LED, FULL BAR, ROOF MOUNT, AMBERSCDOT Spec. No. 146228.01 03/05/15DESCRIPTION: Light, warning, LED, full bar, vehicle roof mount, amber output. The light shall be heavy-duty constructed for rugged use and designed for vehicle roof mount. The warning light will be a Federal Signal model LPX45DS-SCDOT or equal.REQUIREMENTS: The light shall meet SAE J845 Class 1 Standards and have Solaris LED reflector technology. The unit shall consist of four (4) circuit boards with LEDs Reliable Onboard Circuitry (ROC). The ROC circuit boards shall be mounted to top lens serving as a sun shield and have four (4) amber LEDs in the six (6) inner modules, six (6) amber LEDs in the four (4) corner modules, and a traditional nine (9) conductor cable. The unit shall be 12.8vdc with an operating temperature of -30C to +65C degree and rated at (1) amp per module. The unit shall be able to sync with Federal Signal perimeter lights (IPX302-2) and factory set in an alternating quad flash side to side pattern.DIMENSIONS AND MOUNTING: The minimum dimensions of the light shall be 44.5L x 11.2W x 2.5T. The light shall have two (2) top amber lens that mount with eight (8) screws and hardware for surface mounting. Optional mounting feet and hook kits for various mounting options shall be provided.SPECIFICATIONS FOR LIGHT, WARNING, LED, BAR, INTERIOR, REAR, AMBERSCDOT Spec. No. 146229.01 03/05/15DESCRIPTION: Light, warning, LED, bar, vehicle interior, amber output. The warning light shall be heavy-duty constructed for rugged use and designed for permanent install in vehicle rear window. The warning light shall be a Federal Signal model SL4F-A or equal.REQUIREMENTS: The light shall meet SAE J595 Class 1 standards and have Solaris LED Reflector Technology. The light shall have Reliable Onboard Circuitry (ROC) Technology with (3) amber LEDs per module. The extrusion shall be an innovative co-extrusion polycarbonate and have brackets included for interior mounting. The light shall be 12.8vdc and have an operating temperature of -30C to +65C. The light shall be set by the manufacturer to an alternating quad flash pattern.DIMENSIONS AND MOUNTING: The minimum dimension of the light shall be 1.13H x 16.9L x 2.63W and have a universal mounting bracket (320340) included in each box.SPECIFICATIONS FOR LIGHT, WARNING, LED, MINI BAR, ROOF MOUNT, AMBERSCDOT Spec. No. 146231.01 03/05/15DESCRIPTION: Light, warning, LED, mini bar, vehicle roof mount, amber output. The light shall be heavy-duty constructed for rugged use and designed for vehicle roof mount. The warning light will be a Federal Signal model 454201HL-02-SCDOT or equal.REQUIREMENTS: The light shall meet SAE J845 Class 1 standards and have Solaris LED reflector Technology. The light shall have (1) Reliable Onboard Circuitry (ROC) board and mounted to the top dome to serve as a sun shade. The light shall have (34) amber LEDs, (12) front, (12) rear, and (5) on each corner. The top dome shall be secured to the base with (4) self-taping screws. The light shall be 12.8vdc with an operating temperature of -30C to +65C. The light shall be able to synchronize with Federal Signal perimeter LEDs (IPX302-2) and be set by the manufacturer to an alternating side to side quad flash pattern.DIMENSIONS AND MOUNTING: The minimum dimension of the light shall be 2.7H x 15.3L x 8.4W. The light shall have a thick soft rubber mounting pad and mount using (4) self-taping screws.SPECIFICATIONS FOR LIGHT, WARNING, LED, BAR, INTERIOR, WINDSHIELD, AMBERSCDOT Spec. No. 146230.01 03/05/15DESCRIPTION: Light, warning, LED, bar, vehicle interior, amber output. The light shall heavy-duty and constructed for rugged use and designed for permanent install in vehicle windshield. The warning light shall be a Soundoff Signal model ENFSWP2A-PC or equal.REQUIREMENTS: The light shall meet SAE J595 Class 1 standard and have NEXUS Technology. The light shall have (9) PC amber Gen 3 LEDs and a shroud to eliminate flash back. The light shall be 10-16vdc and have an operating temperature of -40C to +65C. The light shall have a maximum amp draw of (1.5) amps at 12.8vdc. The manufacturer shall set the light with a quad flash pattern

Product Codes: 05557, 05554

Agency Information


Issuing Agency: State of South Carolina, Department of Transportation (SCDOT)

State: South Carolina

Agency Type: State and Local

Contact: Emmett Kirwan SCDOT - Procurement Services, 955 Park St., Room 101, Columbia, South Carolina, 29201

Phone: 803-737-0676

Email: kirwanei@scdot.org

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW