Government Contract | Illinois
Lead Hazard Control Program-1 Unit

Bid Information


Bid Alert No: 00000494792

Bid Title: Lead Hazard Control Program-1 Unit

Agency Bid No. Title: Not Stated

Received Date: 02/24/2016

Close Date: 03/07/2016

Purchase Type: Not Stated

Delivery Point: Moline, Illinois

Delivery Date: Not Stated

Special Notices: Site-Walk Optional 02/29/2016 11:00 AM, Bidder Preregistration

Specifications

Specifications include, but are not limited to:Exterior DOOR - STABILIZE. PLANE & ADJUSTAfter establishing any required floor containment withpolyethylene sheeting , remove door hinge pins and carry to afully contained lead work room. Place pins in plastic bag on jambfor safekeeping. Plane door edges and adjust the hasp andstrike plate to minimize door/jamb friction and contact. Mistdeteriorated paint with water to the point of saturation. Replacestop molding . Clean and de-gloss door with detergent wash ,rinse. dry and HEPA vacuum any paint chips, dust and debris.Spot prime and top coat with premium acrylic latex . Re-installdoor on hinges.A. Door jamb is to be scraped and painted .B. Install weather stripping around stopTRIM-- STABILIZE AND PAINT WITH ACRYLIC LATEXAfter establishing any required floor containment withpolyethylene sheeting, wet mist defective paint area with waterto the point of saturation. Lightly scrape all loose paint. Featheredges with a wet, 100-grit sponge sanding block saturated withdeglossing agent. Wash with detergent solution, rinse, allow todry and HEPA vacuum any paint chips, dust and debris. Spotprime and top coat with premium acrylic latex paint.A. Door jamb and casing .B. 1x4 trim around wallsVINYL DOUBLE HUNG, LOW-E WINDOW & TRIMAfter establishing any required floor containment withpolyethylene sheeting, wet mist, remove, wrap in polyethylenesheeting and dispose of entire window unit and interior trim.Detergent wash, rinse, allow to dry and HEPA vacuum any paintchips, dust and debris. Field measure and install a PVC, 1 over1, double hung. double glazed, argon filled window with at leasta U-factor of 0.35 rating and 1/2 screen. Wrap exterior jamband sill with .027" aluminum coil stock back caulked and nailed6" on center.Remove, package in plastic and dispose of entirewindow unit Field measure and install a vinyl. fixed, doubleglazed window. Insulate side cavities with strips of fiberglassinsulation, Caulk perimeter of interior stops and sill beforeplacing window in opening. Replace any stops that are notserviceable and touch up any chipped paint or varnish on theinterior. Prep for paint, prime wood and coat with a latex paint.Clean glass. All windows to meet building code and InternationalEnergy Conservation Code. ICC (section R308) safety glassrequirements per IRC code. Obscure glass bottom sashrequired for bathroom windows

Bid Related Documents

Download Document

Product Codes: 91046, 91047

Agency Information


Issuing Agency: City of Moline

State: Illinois

Agency Type: State and Local

Contact: K.J. Whitley, Planning and Development Planning and Development, 619 16th Street, Moline, Illinois, 61265

Phone: 309-542-2044

Fax: 309-524-2031

Email: kwhitley@moline.il.us

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW