Government Contract | North Carolina

Bid Information

Bid Alert No: 00000447200


Agency Bid No. Title: 201501521

Received Date: 12/23/2015

Close Date: 01/13/2016

Purchase Type: Not Stated

Delivery Point:

Delivery Date: Not Stated

Special Notices: Questions Due By 12/28/2015 05:00 PM, Bidder Preregistration


Specifications include, but are not limited to:outside corners of the front and back panels are rounded corners. All sheet sizes are to fit a sheet 11 x 8-1/2, with anadditional allowance for a printed index tab extension, for an overall sheet allowance of 11 x 9. Grain directionfor spine board is optional in order to maximize yield. The 11 side of the sheet is the binding side. Panel widths forthe various capacities of titles detailed in Section 2 are sufficient to allow for the sheet and index tab allowance, withoutthe tab extending beyond the case edge with rings loaded. Lining: Finished construction inside each binder consists of appropriately sized separate hinge reinforcementcovering the inside of binder spine and space between spine panel and front/back panels with hinge materialextending a minimum onto inside of front and back panels. Pockets: Pockets for titles containing pockets are located inside the front cover. The pocket is constructed with alight chipboard (.010) or equivalent, is 4 high from the bottom of the inside front cover and is covered with the samelining material as would be used for the lining of the back panel. The pocket is closed on both right and left sides ofthe pocket opening. General Construction: All cases are of turned-edge construction, utilizing different materials to cover thefront/back panels joined by a heavier specified material bleeding onto the front/back panels to join the two panels toform the case. All four outside corners are rounded corners. Inserted Sheet Lifters: All of the titles listed below are packed with one flat black polystyrene sheet lifter, thicknessgauge of approximately .041, measuring approximately 11 high x 5 wide, and is pre-installed onto each ring (ALLfinished and packed cartons contain individually installed sheet lifters on each binder contained within the carton). Loose leaf Ring Binding Mechanisms: All loose leaf ring binding mechanisms shall be specified by capacity ofthe ring, versus the width measurement of the spine of the finished case. All rings will be of a 3-ring configuration, andwill include opening and closing tab boosters on either end of the base of the ring. All rings are a nickel-plated finish.Capacity (Standard inches measurement and millimeters), Style Round ring or Angle-D ring), and minimum base width(in millimeters) shall be indicated with each individual title below. All ring mechanisms have rivets exposed, and areattached to the back panels.Line Item # 1 - Speed Measuring Binder (Turn-edge Pale green binder with black silkscreened imprint.)Cover material: Front and back panels are covered with a 2-color commercially printed/laminated with AGS mattefilm, base paper substrate consisting of 100# Offset or text Coated two side (C2S) paper. The spine and bleed-overonto the front /back panels material is Black Skiver Embossed Imitation Leather (#18 Weight), and the overall width ofthis piece joining the front/back panels is 5-1/4

Bid Related Documents

Download Document


Download Amendment

Product Code: 96642

Agency Information

Issuing Agency: State of North Carolina - Department of Administration

State: North Carolina

Agency Type: State and Local

Contact: Jim Blue

Phone: 919-743-8145




FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing