Government Contract | Delaware
Harrington Street and Utility Building Paving

Bid Information


Bid Alert No: 00000478372

Bid Title: Harrington Street and Utility Building Paving

Agency Bid No. Title: Not Stated

Received Date: 02/09/2016

Close Date: 04/06/2016

Purchase Type: Not Stated

Delivery Point:

Delivery Date: Not Stated

Special Notices: Pre-Bid Conference Optional 03/23/2016 02:00 PM

Specifications

Specifications include, but are not limited to:Sealed bids are being accepted for the proposed paving as outlined herein. The intent is to contract with one firm for repaving a portion of both Harrington Street and the Utility Buildings parking lot located at 8000 Herring Run Road. Harrington Street and the Parking Lot detailed in this bid may receive milling, base repairs, resurfacing and/or patching, handicap ramp installation, and striping are also included in the intended work. The prices bid for furnishing hot mix overlay shall include all necessary butt joints, incidental milling, utility adjustments and other work necessary to produce a smooth transition between the new work and all existing locations adjoining the proposed installation. This shall include the top soiling and seeding of grassed areas adjacent to the new paving edges to create a smooth transition with a maximum slope of 2:1. In addition the contractor shall fill and stabilize any existing large depressions (sink holes and ruts) in the grade adjacent to the paving edge. These areas shall be back filled, top soiled and seeded. The successful contractor is to perform any required survey work to produce a true line, grade and profile of the road to be overlaid. The intent is to install the hot mix in a manner that will completely drain and prevent excessive amounts of standing water during and after rain events. Material to be used is hot mixed, hot laid, bituminous concrete mix Type C (or equivalent). The successful bidder shall submit a specification of the material and the source of supply to the owner for approval with his bid. Bituminous concrete shall be spread by a spreading and finishing machine. Equipment shall be self-propelled type, approved by the Director of Public Works and capable of spreading the mixture true to the line, grade, width and crown specified. This equipment shall also be provided with means for heating the screed members so that it will prevent the accumulation of asphalt material. An application of CRS-1 or RS-1 asphalt cement tack coat (or equivalent) shall be applied on all surfaces before placement of the hot-mix concrete on the roadway. All other specifications necessary for the completion of the roadwork and not mentioned herein, shall conform to the State of Delaware Standard Specifications for Road and Bridge Construction, Section 401, Hot Mix; Hot-Laid Bituminous Concrete Pavement dated July 1985

Bid Related Documents

Download Document

Product Codes: 96154, 96861, 91063, 91276, 91347, 91396, 91395, 91371, 98852

Agency Information


Issuing Agency: City of Seaford

State: Delaware

Agency Type: State and Local

Contact: Berley Mears 414 High Street, PO Box 1100, Seaford, Delaware, 19973

Phone: 302-629-8307

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW