Government Contract | South Carolina
GRIT REMOVAL SCREW CONVEYOR

Bid Information


Bid Alert No: 00000459546

Bid Title: GRIT REMOVAL SCREW CONVEYOR

Agency Bid No. Title: PUR695

Received Date: 01/14/2016

Close Date: 02/09/2016

Purchase Type: Not Stated

Delivery Point: Rock Hill, South Carolina

Delivery Date: Not Stated

Special Notices: Questions Due By 02/04/2016 02:00 PM, Warranty Required

Specifications

Specifications include, but are not limited to:A. Conveyor Assembly1. The conveyor shall be made of sectional steel flights fabricated from 3/8 inch thick steelmounted on pipe of sufficient diameter to span between bearings.a. The center pipe shall be a minimum of 10 inches in diameter.2. The head and tail shafts shall be of sufficient diameter to withstand starting and operatingthe screw when completely covered with grit.3. The sections of the screw within the grit collector housing shall be full pitch.B. U-Trough1. The screw conveyor trough shall be an angle flange open U trough design made of 304stainless steel and of sufficient thickness to carry the load of a conveyor full of grit(minimum of 11 gauge stainless steel).2. The trough shall have flat covers made of 14 gauge 304 stainless steel.a. The covers shall be supplied in maximum 10 foot long sections and cover the entirelength of the U-Trough except at the grit collector inlet hoppers.b. Covers shall be held in place every 18" with a screw clamp.c. Provide a minimum of 4 screw clamps per cover section.d. The covers shall include a Neoprene seal, minimum 1/4 thick, along its entirelength to seal it to the U-Trough.C. Drive System1. The screw conveyor shall be driven by a shaft-mounted helical gear design speed reducer.2. The reducer shall be mounted directly on the screw conveyor drive shaft and the driveframe shall be bolted to the screw conveyor housing forming the bracket.3. The motor shall be mounted on an adjustable base and shall transmit power to the screwthrough V-belts and sheaves.

Bid Related Documents

Download Document

Product Codes: 89000, 89065

Agency Information


Issuing Agency: City of Rock Hill

State: South Carolina

Agency Type: State and Local

Contact: Tom Stanford 757 South Anderson Road, Building 103, Rock Hill, South Carolina, 29730

Phone: 803-329-7070

Email: tom.stanford@cityofrockhill.com

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW