Government Contract | New York
Furnish and install new chain link fencing

Bid Information

Bid Alert No: 00000447104

Bid Title: Furnish and install new chain link fencing

Agency Bid No. Title: 15/16-077MC

Received Date: 12/23/2015

Close Date: 01/22/2016

Purchase Type: 5 year term

Delivery Point:

Delivery Date: Not Stated

Special Notices: Pre-Bid Conference Mandatory 01/07/2016 11:00 AM, Questions Due By 01/13/2016 05:00 PM


Specifications include, but are not limited to:The successful bidder will install all chain link fencing in accordance with ASTM F 567. Space terminal posts distance to line posts equal distant 10' feet maximum center to center of posts. All posts to be set in concrete. Dig holes 4 times the diameter of the post, and 6" inches deeper than the bottom of the post. Crown concrete at top to shed water, Brace rails and truss rods to be installed a midpoint of all 6' feet high and over, or any fence without a top rail. One (1) brace per end or gate post, two (2) braces per corner or pull post. Install tension wire at bottom of fabric (and at top, if top rail is not specified). All top rails with lengths greater than 20" feet shall be connected to joint sleeves for rigid connections for expansion/contraction. Center rails are to be installed when fence fabric is greater than 6' feet high or when specified by the University representative. Install all chain link fabric so that any center rails remain on the secured side and attached so that the fabric remains in tension after pulling force is released. Leave approximately two (2) inches between finish grade and bottom selvage. Attach fabric with wire ties to top rails at 15" inches on center and at center rails, braces, and tension wire at 24" inches on center. Stretcher bars are to be threaded through the chain link fabric and attach to the terminal posts, line posts with bands spaced maximum of 15" inches on center. All other categories for parts and materials will be in accordance with all ASTM standards such as: ASTM F626 Fittings, ASTM F900 Swing gates, ASTM F1184 Sliding gates, and ASTM A392.

Product Code: 98815

Agency Information

Issuing Agency: State University of New York - Stony Brook

State: New York

Agency Type: State and Local

Contact: Stony Brook University, Research & Development Park, RSS Building, Stony Brook, New York, 11794



FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing