Bid Information
Bid Alert No: 00000408111
Bid Title: Flail Mower System
Agency Bid No. Title: 420-175
Received Date: 11/02/2015
Close Date: 11/05/2015
Purchase Type: Not Stated
Delivery Point: Lambert Airport Central Stores, 4780 St Andrew Lane, Bridgeton, Missouri, 63044
Delivery Date: Not Stated
Special Notices: Bidder Preregistration
Specifications
Specifications include, but are not limited to:Side Flail MowerCutting width shall be at least 90" of actual cut each.Side flail cutter assembly shall be flail type, hydraulically powered.Rear flail cutter head assembly weight shall be a minimum of 1,215 lbs.Side Flail Mower cont.cutter head arc shall be 1500 from vertical position (Rear unit) .Cutting height shall be infinitely adjustable from -1/2" to +6". (It shall not be necessary to remove the rollermounting brackets to adjust cutting height).Mounting SystemMainframe ofthe mower shall be attached to the tractors front bolster and rear end housing with the lift assemblysupported by the mid of the tractor.Lift assembly shall have one single acting and one double acting hydraulic cylinders controlling inboard andoutboard ends of cutter head. Cutter Head control (tilt) shall be accomplished by means of direct connectedlinkage to a double acting cylinder, allowing precise operation of cutting assembly. A single acting cylinderprovides lift for the cutter head assembly.IHydraulicsHydraulic motor shall have an output rating of 81 H.P.M~tors shall have cast steel housing with steel gears.Hydraulic pressure connections shall meet SAE a-ring and TIC standards.Reservoir shall be internally treated against corrosion with industry approved chemical agent at time ofmanufacture. Reservoir shall have an in tank filter rated at 75 GPM, 10 micron, 200 beta, element with bypass,restriction gauge, minimum (l) one PSI pressure at suction outlet and have ball valve at suction line. Tankpressurized to 3 PSI. (VENDOR REQUIREMENT) Submit material used to treat reservoir (include MSDSsheet). Type, design and micron size of filter element.Hydraulic oil shall meet a cleanliness standard of ISO 46 rating. (VENDOR REQUIREMENT) Submit reportof:011 sample used.Hydraulic pump shall be tandem gear type with a rating of 136 input H.P, producing 60 GPM (30 GPM eachsection) at 3,500 PSI.
Bid Related Documents
Download DocumentProduct Codes: 02015, 02064, 02065, 02066
Agency Information
Issuing Agency: City of St. Louis
State: Missouri
Agency Type: State and Local
Contact: John Cassidy Office of the Supply Commissioner, 1200 Market Street, Room 324, St. Louis, Missouri, 63103
Phone: 314-622-4596
Fax: 314-622-4141
Email: cassidyj@stlouis-mo.gov