Government Contract | Maryland
First Aid Kits

Bid Information


Bid Alert No: 00000409234

Bid Title: First Aid Kits

Agency Bid No. Title: 001IT820065

Received Date: 11/03/2015

Close Date: 11/23/2015

Purchase Type: Not Stated

Delivery Point: Maryland

Delivery Date: Not Stated

Special Notices: Pre-Bid Conference Optional 11/06/2015 10:00 AM, Bidder Preregistration

Specifications

Specifications include, but are not limited to:Vehicle Logging Kit Specifications1. The first aid kit must be screen printed on the front cover with a Red Cross and red lettering that reads Vehicle andLogging on the first line and the second line is to read First Aid Kit. The cross needs to be large enough to becentered between line one (1) and line two (2). All items need to be centered vertically and horizontally on the frontcover of the first aid kit. Please provide layout for approval prior to utilization.2. All unit packages shall be constructed of high quality fiberboard.Facility First Aid Kit Specifications1. The first aid kit must be screen printed on the front cover with a Red Cross and red lettering that reads Facility onthe first line and the second line is to read First Aid Kit. The cross needs to be large enough to be centered between line one (1) and line two (2). All items need to be centered vertically and horizontally on the front coverof the first aid kit. Please provide layout for approval prior to utilization.Design and Performance Specifications (includes items for both kits):All Standard Cases shall be:1. Case:A. Constructed of a 20 gauge steel.B. The body of the case shall be divided with a steel divider so that the two compartments so formed are equal inarea. The divider will be placed in the kit in a horizontal position when the case is wall mounted. The exteriordimensions of the kit shall be approximately 13-3/4 inches x 9-1/4 inches x 3-1/4 inches.C. The case shall be finished both inside and outside in a baked white enamel finish. The case shall be white incolor. On the lid will be silk-screened as stated in eight (8) in the general terms.D. The inside of the lid shall have adhered to it a listing of first aid instructions and the contents with the First aidkit contents. The label shall include a statement that the kit and contents are in accordance with latest 29CFR1910.266 and ANSI Z.308.1 at the bottom on the list.E. Be dust and moisture resistantF. Have seamless or welded seams and jointsG. Have rounded cornersH. Have no sharp edgesI. Have a cover attached by a continuous piano hinge incorporating a 90 degree (+ 5 degree) stop, welded orriveted in place.J. Have a steel wire handleK. Have two or more pull down type fasteners, welded in placeL. Have two hinged hanger brackets of keyhole type welded in place.M. Have a rubber or synthetic gasket mounted in the cover or body of the kit to provide a dust and moistureresistant seal.

Product Code: 34532

Agency Information


Issuing Agency: State of Maryland - Department of General Services

State: Maryland

Agency Type: State and Local

Contact: Stacey Pollitt Office of Procurement & Logistics, 301 West Preston Street, Room M-4, Baltimore,, Maryland, 21201

Phone: 410-767-3002

Fax: 410-333-5509

Email: stacey.pollitt1@maryland.gov

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW