Government Contract | Kansas
Fire Pumper Truck

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information

Bid Alert No: 00000415992

Bid Title: Fire Pumper Truck

Agency Bid No. Title: 16-72

Received Date: 11/11/2015

Close Date: 11/24/2015

Purchase Type: Not Stated

Delivery Point: Hutchinson, Kansas

Delivery Date: Not Stated

Special Notices: Bid Bond Required: 10%, Warranty Required, Performance Bond Required: 100%


Specifications include, but are not limited to:CHASSISChassis provided shall be a new, tilt-type custom fire apparatus. The preferred chassis shall bemanufactured in the chassis builder's facility eliminating any split responsibility. The chassisshall be designed and manufactured for heavy-duty service, with adequate strength and capacityfor the intended load to be sustained and the type of service required.WHEELBASEThe wheelbase of the vehicle shall be no greater than 211.50".GVW RATINGThe gross vehicle weight rating shall be a minimum of 45,000 lbs.FRAMEThe chassis frame shall be built with two (2) steel channels bolted to five (5) cross members or more, depending on other options of the apparatus. The side rails shall be heat-treated steelmeasuring 10.25" x 3.00" x .375".Each rail shall have a section modulus of 16.00 in., yield strength of 120,000 psi, and a resistingbending moment (rbm) of 1,921,069 inch-pounds.FRAME REINFORCEMENTA full-length mainframe "C" liner shall be provided.The liner shall be an internal "C" design, heat-treated steel measuring 9.38" x 3.13" x .25". Eachreinforcement member shall have a section modulus of 3.90 in., yield strength of 120,000 psi andresisting bending moment (rbm) of 938,762 in-lb.FRONT NON DRIVE AXLEThe front axle shall be a reverse "I" beam type with inclined king pins, with a rated capacity of18,000 lb.FRONT SUSPENSIONThe front springs shall be a three (3)-leaf, taper leaf design, with a ground rating of 18,000 lb.The two (2) top leaves shall wrap the forward spring hanger pin. The top leaf shall also wrap therear spring hanger pin. Both the front and rear eyes shall be Berlin style wraps that shall placethe eyes in the horizontal plane within the main leaf. This shall reduce bending stress fromacceleration and braking.

Bid Related Documents

Download Document

Product Code: 07230

Agency Information

Issuing Agency: City of Hutchinson

State: Kansas

Agency Type: State and Local

Contact: Marjorie K. Bryant, Finance Department City Clerk, 125 East Ave B, P.O. Box 1567, Hutchinson, Kansas, 67501

Phone: 620-694-1970

Fax: 620-694-1900




FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing