Government Contract | Michigan

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information

Bid Alert No: 00000500400


Agency Bid No. Title: Not Stated

Received Date: 03/02/2016

Close Date: 03/23/2016

Purchase Type: Not Stated

Delivery Point:

Delivery Date: Not Stated


Specifications include, but are not limited to:GENERAL REQUIREMENTSUnless specified otherwise, all Major A seams (outer shell body seams) shall be at least double-needle stitched, using one or a combination of the following stitch types: 301, 401, 504, and 516. All Major B seams (moisture barrier and thermal liner seams) shall be stitched using stitch type 516. In addition, moisture barrier seams shall be heat and pressure sealed with a 1" wide sealing tape for protection against liquid penetration. All stress points such as pockets, flaps, zippers, storm flap, and tabs shall be bartacked for reinforcement using no more than 28 stitches over 5/8" to prevent damage to the material.All seams shall use Nomex thread only. There shall not be any skipped stitches, broken threads or visible tucks. If there are any broken threads, they are to be repaired from the same needle holes. Thread tension shall be constant throughout. The seam shall be taut and without balls of thread. Stitches per inch shall be as follows so that the needle perforations do not affect the more susceptible materials: 6 1 for liner topstitching and padding; 7 1 for trim; and 8 1 for other stitches including feed-off and overlock. Backtacks shall be used on all lock stitches and shall have a minimum of 3 and a maximum of 4 stitches. All pockets and reflective trim shall be lock-stitched to the body of the garment. All hook and loop fasteners shall be lock-stitched. Hook and loop fastener strips of 4" and less in length (pocket closures, throat tab) shall be attached with a box & cross stitch pattern.Inspection port #278Max-view Inspection port with zipper____________COMPLY____________EXCEPTIONCOLLAR#2473" Collar____________COMPLY____________EXCEPTIONNAME PATCHESRemovable name patch#365Hanging name patch 4" X 19"The name patch shall be located on the edge of the back.Position F____________COMPLY____________EXCEPTIONPANT CONSTRUCTIONBody____________COMPLY____________EXCEPTIONReflective letters and/or numbers shall be available to permit identification on each garment. The letters and/or numbers shall be arranged as follows.The collar shall consist of two layers of outer shell fabric sandwiching layers of moisture barrier and thermal barrier material. The collar shall be a minimum 3" high. The moisture barrier shall continue " below the neck line. The coat shall have an inspection port to permit visual inspection of the moisture barrier film and thermal liner substrate without the need to undo seams. The inspection port shall consist of an opening in the back thermal liner, closed with #5 black Nylon zipper on Nomex tape. The opening shall be approximately 20" long

Bid Related Documents

Download Document

Product Code: 34034

Agency Information

Issuing Agency: City of Holland

State: Michigan

Agency Type: State and Local

Contact: Tim Vagle, Finance 270 South River Avenue, Holland, Michigan, 49423

Phone: 616-355-1377




FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing