Government Contract | Nebraska
Fire Apparatus Pumpers

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information

Bid Alert No: 00000405212

Bid Title: Fire Apparatus Pumpers

Agency Bid No. Title: Not Stated

Received Date: 10/30/2015

Close Date: 12/02/2015

Purchase Type: Not Stated

Delivery Point: Omaha, Nebraska

Delivery Date: Not Stated

Special Notices: Bidder Preregistration


Specifications include, but are not limited to:Chassis and cab to be the latest model, first line, totally enclosed, medium length,99 inch wide, 10 inch raised roof, six man, engine forward, full open interior, 4 door tilttype. Cab must be well braced and reinforced to provide maximum protection for firefighters and made of no less than .125 aluminum. An aluminum extrusion frame workmust be used in construction.51. All cab and canopy doors to be ample size for easy access and shall be equippedwith roll down windows. Safety glass shall be installed throughout. Doors to be extremeduty with limited use of plastics.SEATS52. The driver's seat shall be an H.O. Bostrom Sierra model seat with air suspension. Thefour-way seat shall feature 3.00 inch vertical travel air suspension and manual fore andaft adjustment with 5.00 inches of travel. The suspension control shall be located on theseat below the left front corner of the bottom cushion. The seat shall also featureintegral springs to isolate shock.53. The seat position shall include a three-point shoulder harness with lap belt and anautomatic retractor attached to the cab. The buckle portion of the seat belt shall bemounted on a semi-rigid stalk extending from the seat base within easy reach of theoccupant.54. The minimum vertical dimension from the seat H-point to the ceiling for this beltedseating position shall be 37.00 inches measured with the seat suspension height adjustedto the upper limit of its travel.55. This model of seat shall have successfully completed the static load tests set forth byFMVSS 207, 209, and 210 in effect at the time of manufacture. This testing shall includea simultaneous forward load of 3000 pounds each on the lap and shoulder belts andtwenty (20) times the weight through the center of gravity.56. The materials used in construction of the seat shall also have successfully completedtesting with regard to the flammability of materials used in the occupant compartments ofmotor vehicles as outlined in FMVSS 302, of which dictates the allowable burning rate ofmaterials in the occupant compartments of motor vehicles.57. The drivers seat shall feature a two (2) way adjustable lumbar support and offer aninfinite fully reclining adjustable titling seat back. The seat back shall also feature acontoured head rest.

Bid Related Documents

Download Document

Product Code: 07230

Agency Information

Issuing Agency: City of Omaha

State: Nebraska

Agency Type: State and Local

Contact: Parks, Recreation & Public Property Department, 1819 Farnam Street, Omaha, Nebraska, 68183



FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing