Government Contract | Texas
Fencing Equipment, Services and Related Items

Bid Information

Bid Alert No: 00000399859

Bid Title: Fencing Equipment, Services and Related Items

Agency Bid No. Title: 16-004CC

Received Date: 10/23/2015

Close Date: 11/12/2015

Purchase Type: Not Stated

Delivery Point: Fort Bend County, Texas

Delivery Date: Not Stated

Special Notices: Pre-Bid Conference Optional 10/29/2015 11:00 AM, Bidder Preregistration


Specifications include, but are not limited to:1.Chain link fabric shall be two (2) inch x nine (9) gauge galvanized wire. 2.Fabric shall be knuckle and knuckle with a nine (9) gauge galvanized coil spring attached at points no less than 24 inches on center. 3.Expanded metal is to be three-quarter () inch x nine (9) gauge galvanized finish. 4.Terminal and gate posts shall be three (3) inch diameter schedule forty (40) galvanized pipe set in thirty six (36) inch x twelve (12) inch concrete footings. 5.Line posts shall be two and three eights (2 3/8) inch diameter schedule forty (40) galvanized pipe set in thirty six (36) inch x ten (10) inch concrete footings. 6.Top rail shall be one and five eights (1 5/8) inch diameter schedule forty (40) galvanized pipe 7.Gate frames shall be welded two (2) inch diameter galvanized pipe. 8.Line posts are to be set no wider than ten (10) feet on center. 9.All fittings and attachments to be galvanized or zinc coated finish with the exception of the panic devices. 10.Exit walk gates shall include Von Duprin 99NL x Ives VR910NL x US32D. Lock cylinders shall accept Best keyway to maintain compatibility with existing hardware and district keying plan. Mower gates and double drive gates shall be fitted with lockable hasp to accept standard padlock furnished by SBISD 11.Walk gates shall be constructed with eight (8) inch wide galvanized channel with two (2) inch lips for mounting panic device. Expanded wire mesh is to be placed thirty-six (36) inches above and below steel channel and thirty-six (36) inches on each adjacent side fence to prevent reach through access. Gate hinges shall be heavy-duty welded type with grease fittings. All gates shall swing out from the building for emergency exit. Exit gates shall have a header installed at seven (7) feet for stability and attachment of closer. 12. All welds used in the fabrication process shall be thoroughly cleaned; spot primed and painted with a rust resistant paint to match the galvanized finish. 13. Walk gates shall be sixty (60) inches wide and mower gates shall be seventy two (72) inches wide. Double gates shall be twelve (12) feet wide with drop bar. Hinges on double gates to be industrial one hundred eighty (180) degree clamp on type. 14. Where posts are set in asphalt or concrete surfaces contractor shall core drill hole and fill footing level with existing grade. 15. All fittings shall be galvanized pressed steel or malleable iron. 16. Gates costs include posts. 17. All exit walk gates shall be self-closing utilizing LCN model 4041CUSH x 693 x SRI x 18PA x 419 door closer or equivalent.

Bid Related Documents

Download Document

Product Codes: 98815, 33013

Agency Information

Issuing Agency: Fort Bend Independent School District

State: Texas

Agency Type: State and Local

Contact: David Moore, Design and Construction Department 555 Julie Rivers Drive, Sugar Land, Texas, 77478

Phone: 281-634-5591




FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing