Government Contract | Minnesota
Expansion Joint Repairs 11th and Marquette Parking Facility

Bid Information

Bid Alert No: 00000526866

Bid Title: Expansion Joint Repairs 11th and Marquette Parking Facility

Agency Bid No. Title: DS032416A

Received Date: 03/29/2016

Close Date: 04/07/2016

Purchase Type: Not Stated

Delivery Point: Minneapolis, Minnesota

Delivery Date: Not Stated


Specifications include, but are not limited to: provide all materials, labor, equipment and incidentals for the construction of Expansion Joint Repairs at the 11th and Marquette Parking Facility for the City of Minneapolis, all in accordance with the provided specifications and bid form. Sample freshly-mixed concrete, including prepackaged concrete, per ASTM C172 and conduct one (1) air content test per ASTM C231 or ASTM C173 for each 10 cu yards of concrete placed or each day's production, whichever is less. 2. Conduct one (1) slump test in accordance with ASTM C143 for each 10 yards of concrete placed, or each days production, whichever is less. 3. Mold and test compression test cylinders in accordance with ASTM C31 and test in accordance with ASTM C31 as follows: a. Take minimum of 6 cylinders for each 25 cu yards or fraction thereof, of each mix design of concrete placed in any 1 day. Use of 4 in. x 8 in. cylinders in lieu of standard cylinders is acceptable. b. Cover specimens properly, immediately after finishing. Protect outside surfaces of cardboard molds, if used, from contact with sources of water for first 24 hours after molding. c. Store test specimens on structure as near to point of sampling as possible and protect from elements in same manner as that given to portion of structure as specimen represents. d. Transport to test laboratory no more than 4 hours before testing. Remove molds from specimens immediately before testing. e. During first 24 hours after molding, store test specimens under conditions that maintain temperature immediately adjacent to specimens in range of 60 to 80 F. and prevent loss of moisture from specimens. f. Remove test specimens from molds at end of 20 4 hours and store at 73 3F., 50 4% relative humidity in laboratory until moment of test.

Bid Related Documents

Download Document

Product Codes: 91430, 91000, 91400

Agency Information

Issuing Agency: City of Minneapolis

State: Minnesota

Agency Type: State and Local

Contact: David Schlueter, Purchasing Department Purchasing Department, 330 Second Avenue South, Suite 552, Minneapolis, Minnesota, 55401

Phone: 612-673-2834

Fax: 612-673-2106




FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing