Government Contract | Massachusetts
Ductile Iron Pipe

Bid Information


Bid Alert No: 00001074695

Bid Title: Ductile Iron Pipe

Agency Bid No. Title: 17-016

Received Date: 08/30/2017

Close Date: 09/12/2017

Purchase Type: Not Stated

Delivery Point: Beverly, Massachusetts

Delivery Date: Not Stated

Special Notices: Warranty Required

Specifications

Specifications include, but are not limited to:All ductile iron pipe shall be designed in accordance with AWWA C150 and shall be manufactured inaccordance with AWWA C151. Ductile iron pipe shall be Thickness Class 52. Standards: Ductile iron pipe shall conform to AWWA C150 and C151, subject to the followingsupplemental requirements. The pipe shall be of the diameter and class shown, shall be furnishedcomplete with rubber gaskets as indicated in the Contract Documents, and all specials and fittings shallbe provided as required under the Contract Documents. The ductile iron pipe shall be manufactured orsupplied by AMERICAN Ductile Iron Pipe or preapproved equal. Joints shall conform to AWWA C111,cement linings to AWWA C104, fittings to AWWA C153 or C110Markings: Upon request, the CONTRACTOR shall require the MANUFACTURER to legibly mark specials inaccordance with a laying schedule and marking diagram. All other cast marks and other marks shall be inaccordance with applicable Standards. Laying Lengths: Pipe laying lengths shall be provided in 20 foot nominal lengths with allowable trim pipelengths in accordance with AWWA C151. Joint Design: Ductile iron pipe shall be furnished with pushon joints.LINING AND COATING: The inside of pipe and fittings shall be given a cement lining and asphaltic seal coat in accordance withAWWA C104. The thickness of the lining shall be double that specified in AWWA C104. The outside of pipe and fittings shall be coated with the standard asphaltic coating specified under theappropriate AWWA Standard Specification for pipe and fittings. Machined surfaces shall be cleaned and coated with a suitable rust preventative coating at the shopimmediately after being machined. Coating: The exterior of ductile iron pipe shall be coated with a layer of arcsprayed zinc per ISO8179.The mass of the zinc applied shall be 200 g/m2 of pipe surface area. A finishing layer topcoat shall beapplied to the zinc. The coating system shall conform in every respect to ISO 81791 Ductile iron pipes External zincbased coatingPart 1: Metallic zinc with finishing layer. Second edition 20040601. Ductile iron pipe shall conform to the requirements of AWWA C150, C151, C111 and shall be doublecement lined. The wall thickness shall be Class 52.

Bid Related Documents

Download Document

Bid Related Attachments

Download Attachment Download Attachment

Amendments

Download Amendment

Product Code: 65846

Agency Information


Issuing Agency: City of Beverly

State: Massachusetts

Agency Type: State and Local

Contact: 191 Cabot St., Beverly, Massachusetts, 01915

Email: dgelineau@beverlyma.gov

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW