Government Contract | Louisiana
DISTRICTWIDE ASPHALTIC SURFACE TREATMENT

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information


Bid Alert No: 00000517619

Bid Title: DISTRICTWIDE ASPHALTIC SURFACE TREATMENT

Agency Bid No. Title: H.009913.6

Received Date: 03/18/2016

Close Date: 04/13/2016

Purchase Type: Not Stated

Delivery Point:

Delivery Date: Not Stated

Specifications

Specifications include, but are not limited to:(2) Wood: Plywood sheeting of exterior type Grades either High Density Overlay or Medium Density Overlay, are acceptable for use provided the following requirements are met. Panels shall be a minimum of 5/8 inch (15 mm) thick and shall comply with the latest American Plywood Association specifications and be identified with the APA edge mark or back stamp to verify inspection and testing. Prior to application of reflective sheeting, the surface shall be abraded with steel wool or fine sandpaper, and wiped thoroughly clean. The surface shall be allowed to dry a minimum of 8 hours prior to application of sheeting. Cut edges of plywood panels shall be sealed with an approved aluminum pigmented polyurethane sealer. (3) Plastic: Plastic substrate for barricade panels and signs shall be as follows. a. Fiber Reinforced Vinyl (PVC): The substrate shall have a nominal composite thickness of 0.04 inches (1 mm) and be bonded to an approved retroreflective material by the manufacturer. b. Rigid Thermoplastic: Rigid thermoplastic substrate shall consist of either High Density Polyethylene (HDPE) or High Density Polycarbonate (HDPC). The rigid thermoplastic for barricade panels shall be hollow core HDPE or HDPC with a minimum thickness of 0.625 inch (16 mm). The thermoplastic for sign panels shall be either 0.40 inch (10 mm) thick thin wall, fluted substrate or 0.625 inch (16 mm) thick blow molded substrate. Substrates shall be sufficiently rigid to maintain a flat face and shall be capable of attachment to the sign mounting in such a manner as not to crush or otherwise deform the substrate. Reflectorized sheeting applied to rigid thermoplastic shall have its manufacturer's approval for use on the substrate

Bid Related Documents

Download Document

Product Codes: 96861, 91276, 91327, 91396, 91395

Agency Information


Issuing Agency: State of Louisiana - Department of Transportation and Development (DOTD)

State: Louisiana

Agency Type: State and Local

Contact: Alfonzo Simon District 04 Headquarters,, 3339 Industrial Drive, Bossier City, Louisiana, 71112

Phone: 225-379-1111

Fax: 225-379-1857

Email: alfonzo.simon@la.gov

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW