Government Contract | New York
DESIGN SERVICES AND DESIGN SERVICES DURING CONSTRUCTION FOR THE BRONX RIVER LONG TERM CONTROL PLAN

Bid Information


Bid Alert No: 00001074992

Bid Title: DESIGN SERVICES AND DESIGN SERVICES DURING CONSTRUCTION FOR THE BRONX RIVER LONG TERM CONTROL PLAN

Agency Bid No. Title: 82618WP01425

Received Date: 08/30/2017

Close Date: 10/11/2017

Purchase Type: Start Date March 12, 2018

Delivery Point: 59-17 Junction Boulevard, 17th Floor, Flushing, New York, 11351

Delivery Date: Not Stated

Special Notices: Pre-Bid Conference Mandatory 09/07/2017 02:30 PM, Minority Business Set-Aside, Women-Owned Business Set-Aside

Specifications

Specifications include, but are not limited to:The scope of planning and design services for this contract includes but is not limited to thefollowing:1. Provide hydraulic relief for Outfall HP-007a. Plan and design a new approximately 2,700 feet long; approximately 5-feet diameterrelief interceptor and new relief structure from the sewer near Relief Structure 27(East 177th Street and Bronx Park Avenue) and connected to the existing combinedsewer at East 172nd Street and Metcalf Avenue. Modify Relief Structure 27 asdetermined by the hydraulic analysis. Possibly use microtunneling and open cutconstruction, actual method to be determined by the Consultant.i. The relief interceptor route shall be determined by the Consultant with inputfrom the Department.ii. The relief interceptor, based on the route of the existing sewer, will likely passbeneath and/or near several major features including but not limited to activerail lines, Bronx River Parkway, and Cross Bronx Expressway.b. Plan and design a new relief structure near Relief Structure 27 to control flow to thenew relief interceptor, modifications to the existing sewer for the new relief structure,and the downstream connection location to accommodate the new relief interceptor.c. Plan and design temporary system as required to maintain sewer operation duringconstruction.d. Plan and design a telemetry system to indicate when the relief structure is dischargingto the relief interceptor.2. Provide hydraulic relief for Outfall HP-009a. Plan and design modifications to raise the weir elevation at Regulator 13 (SoundviewPark and the Bronx River) by approximately 1 foot.b. Plan and design a new approximately 1,400 feet long; approximately 6-feet diameterrelief sewer between Regulator 13 and the existing 10-feet by 6-feet Bronx RiverSiphon in Soundview Park. Possibly use microtunneling and /or open cutconstruction, actual method to be determined by the Consultant.c. Plan and design modifications to Regulator 13 and the downstream connectionlocation to accommodate the new relief pipe.d. Plan and design temporary systems as required to maintain sewer operation duringconstruction.e. Plan and design a telemetry system to indicate when the regulator is discharging tothe relief sewer.3. Provide Floatables Control for Outfall HP-011a. Plan and design a new regulator chamber to replace existing Regulator 5 that containsan approximately 4-feet bending weir and underflow baffle north of existingRegulator 5 (White Plains Road and Bronx River Avenue).b. Plan and design temporary systems as required to maintain sewer operation duringconstruction.c. Plan and design telemetry system to indicate when the regulator is discharging to theoverflow to the East River.

Product Codes: 92570, 92518

Agency Information


Issuing Agency: City of New York (NYC), Department of Environmental Protection (DEP)

State: New York

Agency Type: State and Local

Contact: Jeanne Schreiber 59-17 Junction Boulevard, 17th Floor, Flushing, New York, 11351

Phone: 718-595-3456

Fax: 718-595-3278

Email: rfp@dep.nyc.gov

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW