Bid Alert No: 00000458492
Bid Title: CUSTODIAL AND LIGHT MAINTENANCE/REPAIR SERVICES
Agency Bid No. Title: Not Stated
Received Date: 01/12/2016
Close Date: 01/22/2016
Purchase Type: Not Stated
Delivery Point: Flint, Michigan
Delivery Date: Not Stated
Special Notices: Pre-Bid Conference Optional 01/18/2016, Questions Due By 01/19/2016
Specifications include, but are not limited to:The following shall be considered the minimum acceptable standard for the activities performedunder this Contract.Wet Mopping and ScrubbingThe floors shall be properly prepared, thoroughly swept to remove all loose dirt and debris, gum,tar and other foreign substances.Upon completion of wet mopping or scrubbing, the floor shall be clean, free of dirt, stains, spills,marks, mop marks, and properly rinsed and dry mopped to present a clean appearance.All surfaces shall be dry with corners, cracks, and splice joints clean. Cove base, walls, furniture,doors, etc., shall be wiped clean to remove any streaks or splashes.Germicidal disinfectant cleaner shall be used on all restroom floors, walls, partitions, fixturesand equipment when cleaning.Floor Finishing and BuffingFloor finish shall be applied in a thin, even coat. The number of coats applied will depend on theuse and condition of the floor but in no case will be less than two coats be applied.At the stated frequencies, floors shall be wet mopped and buffed between regular floor finishingoperations. The floor shall be properly swept free of all loose dirt prior to mopping.Upon completion of wet mopping, the floor shall be clean and free of dirt, water streaks, mopmarks and properly rinsed and dry mopped to present a clean appearance.All surfaces shall be dry with corners, cracks, and splice joints clean after wet mopping.The floor area will be machine spray buffed to restore the gloss to the floor. Finish floor asnecessary to restore floor to clean, bright appearance. Do not allow floor finish buildup at edgesor corners and blend floor finish into existing floor finish leaving no demarcation line betweenthe two.Stripping and SealingThere shall be complete removal of all dirt, old floor finish and other substances in returningfloor to its original surface. All corners, edges, cracks, splice joints and around other floormounted appurtenances shall be completely cleaned.Two thin coats of appropriate sealer shall be applied with caution to prevent streaking orbleaching of the floor surface. This application shall be applied in accordance with themanufacturer's recommendation and shall be compatible with the floor finish to be used.
Bid Related DocumentsDownload Document
Product Codes: 91039, 90966
Note to Vendors To access the agency specs go to: WWW.BID4MICHIGAN.COM. Registration is mandatory and free for BidNet clients. If you are not already registered, login to WWW.BIDNET.COM and select Add eProcurement Systems. For assistance, call BidNets Bid Alert Service Support Center at 1-800-677-1997.
Issuing Agency: Beecher Community School District/IPT
Agency Type: State and Local
Contact: 1020 W. Coldwater Road, Flint, Michigan, 48505