Government Contract | New Hampshire
Commercial Office Furniture (Part 1 - Mock Up)

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information

Bid Alert No: 00000411096

Bid Title: Commercial Office Furniture (Part 1 - Mock Up)

Agency Bid No. Title: 1830-16

Received Date: 11/06/2015

Close Date: 11/30/2015

Purchase Type: Term:

Delivery Point: New Hampshire

Delivery Date: Not Stated

Special Notices: Bidder Preregistration, Warranty Required


Specifications include, but are not limited to:1.LATERAL FILE: Must meet or exceed the following general specifications: a.All products must carry a minimum manufacturers warranty of 20 years. b.All must meet or exceed BIFMA loading standards requirements. c.File finishes& Chair finishes must match Vendors panel system furniture finishes. d.All Cabinets must have 100% welded steel structural components. Drawer pulls shall be protrude from the file face in manner which provides conformance to Barrier-Free Design (ADA) requirements. Drawer front may be either double wall or single wall construction. The external housing and drawer fronts, bottoms and sides shall be construction of minimum 22-gauge steel. The drawer back panel shall be minimum 24-gauge steel. Internal structural panels and structural drawer backs shall be constructed of 16 & 18 gauge steel respectively. All drawer fronts shall be smoothly finished, with no sharp exposed edges or seams. e.File Drawers shall be full extension. f.File cabinet shall have safety interlock mechanism limiting drawer use to one at a time. g.Files must be fully factory finished on all sides. 2.MOCK-UP SUBMITTAL:a.4-Drawer Lateral File (Quantity 1): nominal 18 deep x 42 wide, with central-locking and counter weight, hanging rails set up for front to back Pendaflex-style filing of letter size documents. Each 42 wide drawer shall have a manufacturers load capacity rating of at least 110 pounds. 3. SEATING: Vendors are to meet or exceed all of the following general specifications. a. Standards: only chairs that meet or exceed all ANSI/BIFMA standards, including ANSI/HFS-100- 1988, are acceptable for submittal and/or consideration. b. Warranty: All chairs must carry a minimum manufacturers warranty of 20 years, inclusive of around-the-clock commercial use warranty covering all defects in materials and workmanship. The warranty shall also include minimum five-year warranty coverage of all pneumatic cylinders, casters and fabrics. A copy of the manufacturers written warranty confirming compliance with these provisions shall be provided.

Bid Related Documents

Download Document


Download Amendment

Product Codes: 42540, 42541, 42542

Agency Information

Issuing Agency: State of New Hampshire - Department of Administrative Services

State: New Hampshire

Agency Type: State and Local

Contact: Karen Dorsett Bureau of Purchase and Property, 25 Capitol Street, Room 102, State House Annex, Concord, New Hampshire, 03301

Phone: 603-271-2201




FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing