Government Contract | Idaho
Combination Granular Spreader and Liquid Deicer

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information

Bid Alert No: 00000568237

Bid Title: Combination Granular Spreader and Liquid Deicer

Agency Bid No. Title: RFQ16000866

Received Date: 05/10/2016

Close Date: 05/20/2016

Purchase Type: Not Stated

Delivery Point: Idaho

Delivery Date: Not Stated

Special Notices: Bidder Preregistration, Warranty Required


Specifications include, but are not limited to:1.Type Slide-In, self-contained hopper for spreader with liquid tank(s) for deicer.2.Size a.Spreader 4 CY water level full.b.Deicer 1200 gallon total liquid capacity.B.Spreader Body1.Construction 10-gauge material with full seam welding inside of hopper body. Bolt-on type side extensions will not be accepted.2.Side Reinforcement Upright side supports on each side of hopper body extending the full height of hopper body taper with full seam welding on one side of support.3.Top Body Reinforcement Must run the entire circumference of the hopper body.4.Body Height - Must not exceed 50 in. as measured from bottom of longitudinals to top of center longitudinal support to reduce center of gravity of loaded unit.5.Body Walls Taper of walls must not exceed 50 degrees from the horizontal plane.6.Lower Longitudinal Sills Formed material supporting spreader and tank skid must be common to entire unit.7.Conveyor Floor 7-gauge material, bolt-in replaceable.8.Conveyor Rear End Plates Material must be adequate to support bearing and hydraulic motor(s) with proper supports.9.Lifting Lugs One (1) located on each top corner. Lugs must be mounted to reinforcing plates that are welded to each side of the hopper body. Welding lifting lugs directly to the hopper body is not acceptable.10.Longitudinal Top Center Brace Removable type.a.Center Support Center longitudinal must be of adequate size and reinforced to support granular material being loaded into hopper thru grids and operators using a 3 CY loader bucket to either push frozen clumped material thru or off grates.

Bid Related Documents

Download Document

Bid Related Attachments

Download Attachment

Product Code: 51575

Agency Information

Issuing Agency: State of Idaho - Department of Transportation

State: Idaho

Agency Type: State and Local

Contact: Chase Croft, Business and Support Management Purchasing Unit Support Management, Purchasing Office, 3311 West State Street, Boise, Idaho, 83707

Phone: 208-334-8049

Fax: 208-287-3864




FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing