Government Contract | California
CNC Machining Center

Bid Information

Bid Alert No: 00000407739

Bid Title: CNC Machining Center

Agency Bid No. Title: 15-07

Received Date: 11/02/2015

Close Date: 11/19/2015

Purchase Type: Not Stated

Delivery Point: San Bernardino City Unified School District, San Bernardino, California

Delivery Date: Not Stated

Special Notices: Bidder Preregistration


Specifications include, but are not limited to:Weeke CNC Machining Center Vantech 480 DB/BHP 008, or equal.Basic Machine: Solid machine foundation provides the rigidity required for high speed gantry movements andmachining operations Gantry movable in X direction Cross support movable in Y and Z direction Paint Grey RDS 240 80 05 Direct chip extraction at the processing unit and separate connection for the extraction device(on site) Safety fence at the machine rear, right and left hand side Light barriers for safety at the machine front Machine pre-wired to accept remote operating pendant Machine frame is pre-configured to accept a gantry mounted push off device and additionalmaterial handling elementsGuide System and Drive Technique: High quality THK style linear guiding system Toothed sack assembly (synchronous drive) in the X-direction and ball bearing screw formovement in Y and Z direction Digital drive technique in X, Y and Z direction featuring:o Maintenance free motors with high resolution optical encoders ensuring precisionaccuracyo Digital drive control units guarantee high reliabilityMATRIX Table 4 x 8:A grooved phenolic MATRIX vacuum system for holding down work pieces comes standard. Thegrooves provide for efficient distribution of vacuum, as well as isolating table areas by inlaying a rubbersealing and/or accepting vacuum pods for fixturing small parts.The MATRIX system offers: Vacuum system for clamping of the work pieces on the surface of the vacuum table The working table is divided into three vacuum quadrants Can be equipped with the optional Quick Pod System for elevating parts Working table length: 2520 mm (99 inches) Working table width: 1250 mm (49 inches) Work piece thickness: maximum 100 mm (3.94 inches)o Includes 65 feet of rubber gasket materialVacuum System: The machine design includes three vacuum pumps with a total vacuum capacity of 324m3/h, 60 Hz (3 x 108 m3/h, 60 Hz). They are directly connected with the vacuum tablevia a distribution device and one of the three vacuum generators serves as master. The vacuum system is one of the largest electrical consumers of any manufacturersmachine. For this reason, the Vantech system utilizes an Eco-Friendly design to

Bid Related Documents

Download Document

Product Codes: 54500, 54548

Agency Information

Issuing Agency: San Bernardino City Unified School District

State: California

Agency Type: State and Local

Contact: 777 North "F" Street, San Bernardino, California, 92410



FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing