Bid Alert No: 00000401425
Bid Title: Clarifier No. 1 Rehabilitation Project
Agency Bid No. Title: Not Stated
Received Date: 10/23/2015
Close Date: 11/10/2015
Purchase Type: Not Stated
Delivery Point: Mount Pleasant, Michigan
Delivery Date: Not Stated
Special Notices: Bid Bond Required: , Performance Bond Required: , Bidder Preregistration
Specifications include, but are not limited to:High pressure water clean the entire interior surfaces of the number one clarifier (west clarifier) to remove all lime scale and sediment, and expose all coating for inspection. Remove all visible oil, grease, soil, dirt and other soluble contaminants. This includes all connecting appurtenances, including the mixing cone, inlet and outlet structures, and walkway supporting structure. B. Spot abrasive blast clean all rusted areas to a SSPC-SP10 near white metal blast standard. Apply two (2) coats of Tnemec Series 20 epoxy or Sherwin Williams Macropoxy 646 PW (B58 Series), at 3.0 to 5.0 mils DFT per coat to the blast cleaned areas. Feather all edges between repaired areas and sound coating, prior to coating application. The majority of the failed areas are in the weir troughs. C. Remove the bolted plate sections on the weir troughs, repair the crevices per this specification and reassemble afar the coating is cured. D. After all spot repairs are completed, spray apply one full coat of Tnemec Series 20 or Sherwin Williams Macropoxy 646 PW (B58 Series)at 3.0-5.0 mils DFT to the entire weir trough. E. Contain all dust and grit in the work area and prevent their entry to other areas of the plant or into the fill outlet pipes on the clarifier. F. Remove and properly dispose of all waste abrasive and paint chips at project conclusion. G. Maintain suitable environmental conditions for application of coatings per the manufacturers recommendations.
Product Codes: 91000, 91400, 91461, 91391
Note to Vendors To access the agency specs go to: WWW.MITN.INFO. Registration is mandatory and free for BidNet clients. If you are not already registered, login to WWW.BIDNET.COM and select Add eProcurement Systems. For assistance, call BidNets Bid Alert Service Support Center at 1-800-677-1997.
Issuing Agency: City of Mount Pleasant/IPT
Agency Type: State and Local
Contact: Jeremy Howard Public Works Building, 1303 N. Franklin Street, Mt. Pleasant, Michigan, 48858