Government Contract | Texas
BELT FILTER PRESS MAINTENANCE & REPAIRS FOR THE DEPARTMENT of PUBLIC WORKS & ENGINEERING

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information


Bid Alert No: 00000449940

Bid Title: BELT FILTER PRESS MAINTENANCE & REPAIRS FOR THE DEPARTMENT of PUBLIC WORKS & ENGINEERING

Agency Bid No. Title: S30-L25619

Received Date: 12/29/2015

Close Date: 03/10/2016

Purchase Type: Not Stated

Delivery Point: City Hall Annex, 900 Bagby, Concourse Lvl, Houston, Texas, 77002

Delivery Date: Not Stated

Special Notices: Pre-Bid Conference 01/06/2016 10:00 AM, Questions Due By 01/12/2016 05:00 PM, Bidder Preregistration

Specifications

Specifications include, but are not limited to:he contractor shall furnish all supervision, labor, parts, tools, materials, equipment, supplies, and facilities necessary to perform semi-annual preventative maintenance inspections (PMIs) and make required repairs and adjustments on the Belt Filter Press Assemblies and Centrifuges listed in Exhibit "BB", Attachment 1. The contractor shall be required to replace those parts needed to assure that the Belt Filter Press Assemblies and Centrifuges operate efficiently, safely and at an optimum level at all times. Please see Exhibit BB, Attachment 1. 1.2 All work will be performed in a first-class, professional manner, to the satisfaction of the designated representative from the City of Houston Wastewater Operations. The Contractor shall complete PMIsusingandcompletinga f a c t o r y r e c o m m e n d e d o r s i m i l a r , C i t y -approved maintenance check sheet, for each PMI, per the guidelines provided in Paragraph 2 below. 2.0 Preventive Maintenance Inspection (PMI) Task Guidelines 2.1 Coordinate and schedule PMIs with the designated representatives form Wastewater Operations to ensure that the Treatment Plant Operations are not disrupted. 2.2 Perform a PMI on each Belt Filter Press, on a semi-annual basis, using an approved maintenance check sheet. The contractor shall, at a minimum, address the following items on each BFP PMI: Inspect roller coatings for damage and wear, inspect roller shafts for wear. Inspect bearings with bearing probe and visually inspect seals and o-rings for wear. Inspect bearing housings and coatings. Inspect bearings for proper amount of grease (If applicable) Inspect all hydraulic and pneumatic steering valves for correct function and inspect paddles for excessive wear. Inspect the steering and tensioning lines, cylinder and other components for leaks. Inspect pneumatic bellows for dry rot. Inspect upper and lower spray bar brushes, seals and nozzles for wear and effective belt cleaning. Inspect all chicanes (plows) for operation and wear. Inspect and adjust all doctor (scraper) blades. Inspect the motor and gearbox for leaks, noise and proper lubrication levels. Inspect and adjust all belt misalignment switches. Inspect and adjust all belt broken switches. Inspect all emergency stop buttons and trip cords for proper operation. Inspect upper and lower belts for wear. Inspect all gravity seals for wear. Inspect oil and filters and change per OEM standards. Lubricate all bearings. Inspect and lubricate all bull gears and pinion gears. Inspect all alarm switches for proper operation. Replace those parts that must be replaced during the PMI. Adjust the inspected/repaired unit, as needed, to insure optimal hydraulic and electrical

Product Code: 91391

Agency Information


Issuing Agency: City of Houston

State: Texas

Agency Type: State and Local

Contact: Yvette Smith City Hall Annex, 901 Bagby, Concourse Lvl, Houston, Texas, 77002

Phone: 832-393-8765

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW