Government Contract | Florida
Automotive Powered Airboat and Trailer

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information

Bid Alert No: 00000501525

Bid Title: Automotive Powered Airboat and Trailer

Agency Bid No. Title: 16-6606

Received Date: 03/03/2016

Close Date: 03/11/2016

Purchase Type: Not Stated

Delivery Point: Collier County, Florida

Delivery Date: Not Stated

Special Notices: Warranty Required


Specifications include, but are not limited to:The specifications intent is to provide descriptions and establish manufacturing requirements forthe airboat and trailer. They shall be manufacturers current production model year equipped withall new standard equipment.The aluminum referenced in specifications shall be 5086 Marine Grade Aluminum. All hardware,such as nuts, bolts, washers, etc., shall be stainless steel; the only exception is the engine standbecause it requires greater strength.The airboat and trailer shall be constructed in accordance with industry standards and it mustconform to all federal, state, and marine safety regulations and meet eligibility requirements forState of Florida Marine Vessel Registration.1. HULL DESIGNThe hull shall be all welded 5086 Marine grade aluminum.a. 16 (foot) aluminum hull (no splicing of hull)b. 8 (foot) deck beam width minimumc. The bottom beam width will be a minimum of 7 8.d. .125 (inch) / 5086 aluminum sides and bulkhead 16 (inch) depthe. 16(inch) transomf. 7 - 2 x 2 x 1/4 thickness full length aluminum T bars from bow to transom, measuring on 7inch centers (bottom hull support).g. T Bars welded between all T bar runners under bulkheadh. Transom 16 (inches) Deck lid: recessed on bow of hull, framed with 2 aluminum hat channel,stainless steel lock, and hydraulic shock, measuring 14 (inches) x 28 (inches).i. .190 (inch)/5086 aluminum in bottom and transom.j. Full Deck Over with non-skid finish, light grey color.k. Deck hatchl. Dry box, drop-in (Note: County shall provide installation details)m. I beam cross brace: One (1) 3n. Floorboards with non-skid finish, light grey color.o. Bow eye: 1 (inch), heavy duty, stainless steelp. Lifting eyes: two (2), (inch), heavy duty, stainless steel, installed on each rear corner of thetransom.q. Drain plugs: two (2) with plugsr. Cherry picker installed on front deck (cherry picker shall be supplied by the Division).s. Front deck will need reinforcement for installation of cherry picker.2. POLYMER, ULTRA HIGH MOLECULAR WEIGHT (UHMW)a. Hull exterior bottom shall be fitted with black 3/8 thick UHMW Polymer with stainless steelfasteners.b. Full sheets of Polymer on the hull bottom to extend the full width and length of the hull.c. Polymer shall cover all welds where bottom and sides meet.d. Polymer attached to hull bottom running surface shall be siliconized for crack resistance andinstalled within 8 of bow to stern with stainless steel, Phillips head machine screws with locknuts and countersunk for a smooth surf

Bid Related Documents

Download Document

Bid Related Attachments

Download Attachment

Product Codes: 12008, 12090

Agency Information

Issuing Agency: County of Collier

State: Florida

Agency Type: State and Local

Contact: Evelyn Colon, Purchasing Purchasing Department, 3327 Tamiami Trail E, Naples, Florida, 34112

Phone: 239-252-2667

Fax: 239-252-2810




FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing