Government Contract | Michigan
Asphalt Emulsion CRS-2

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information

Bid Alert No: 00000598052

Bid Title: Asphalt Emulsion CRS-2

Agency Bid No. Title: Not Stated

Received Date: 06/13/2016

Close Date: 06/20/2016

Purchase Type: Not Stated

Delivery Point:

Delivery Date: Not Stated

Special Notices: Questions Due By 06/16/2016 01:00 PM


Specifications include, but are not limited to:Asphalt Binder. Asphalt binder must be homogeneous, water-free,and must not foam when heated to the maximum temperature specifiedin Table 904-7 for the material required.If using an anti-foaming agent, use a dimethyl polysiloxane type siliconematerial, preferably 1,000 centistoke viscosity grade, unless otherwiseapproved by the Engineer. Do not add amounts greater than 5 parts permillion unless approved by the Engineer. Mechanically mix the asphaltbinder after adding anti-foaming agent while in storage at the asphaltplant.Asphalt cement must be prepared by refining crude petroleum with orwithout the addition of modifiers. Asphalt cement prepared with usedmotor oil is not allowed.The Engineer will allow organic, virgin or recycled modifiers dissolved,dispersed, or reacted in asphalt cement to enhance performance.Asphalt binder must be at least 99.0 percent soluble in accordance withAASHTO T 44 or ASTM D 5546.This specification is not applicable for asphalt binders in which fibers orother discrete particles are larger than 250 micrometers in size.B. Cut-Back Asphalt. Cutback asphalt must meet the requirements ofTable 904-3 and this subsection.

Product Codes: 74542, 74510, 74508

Agency Information

Issuing Agency: State of Michigan - Department of Transportation

State: Michigan

Agency Type: State and Local

Contact: John Dault

Phone: 906-524-6124




FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing