Government Contract | Oklahoma
Airport Water Blasting Pro Forma

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information

Bid Alert No: 00000581273

Bid Title: Airport Water Blasting Pro Forma

Agency Bid No. Title: FY16-046-02A

Received Date: 05/24/2016

Close Date: 06/02/2016

Purchase Type: 1 year term

Delivery Point:

Delivery Date: Not Stated


Specifications include, but are not limited to:It is the intent and purpose of this specification to describe an airfield rubber/markings removal truck used for the removal of runway paint striping, rubber deposits from runways and paint marking rejuvenation. The machine shall perform such removal operations via ultra-high pressure between 35,000 and 40,000 PSI and at a volume of not more than 5 6 gallons (19 - 23 L) per minute. It shall also provide for the simultaneous recovery of all water and debris generated by the process, leaving a clean surface.The unit shall be designed and engineered to be a self-contained, skid mounted system that must be attached to an existing truck chassis as a complete factory built uni. The unit shall also be capable of being shifted into two modes at the drivers discretion, a transport mode for unlimited travel at highway speeds and a work mode which provides a hydrostatic drive and control at speeds required to perform intended paint/rubber removal and paint rejuvenation operations. The design shall allow simple integration with the vehicle chassis to provide performance and function, control and monitoring by a single driver/operator. The configuration shall provide maximum visibility, maneuverability and safety while operating on runways and taxiways. It does not require additional equipment or personnel to transition from one mode to the other.3.1Frame:Heavy gauge galvanized steel with anchoring system and lifting eyes3.2Engine:Cummins or John Deere Diesel or acceptable equivalent3.3Engine Controls:Portable cab mounted remote control panel with ignition switch, digital LED engine monitor & management display, throttle controls & engine emergency shutdown switch3.4Blasting System PTO:Direct drive with gear reduction, vibration dampening & drive protection3.5Primary Drive:Direct drive to high pressure pump hydraulic motor driven vacuum blower3.6Cooling:High efficiency liquid cooling system w/ cooling fan & radiator3.7Charging System:12V alternator with circuit protection and sealed connectors3.8Batteries:2 premium 12V dual purpose batteries3.9Circuit Protection:Heavy duty 50 AMP circuit breaker/main switch heavy duty fuses3.10Fuel Tank:Integrated fuel supply with vehicle fuel tank3.11Hydraulic Tank:Stainless steel with integrated fluid cooler & fan

Bid Related Documents

Download Document

Bid Related Attachments

Download Attachment


Download Amendment

Product Codes: 91364, 96861, 91276

Agency Information

Issuing Agency: Tulsa International Airport

State: Oklahoma

Agency Type: State and Local

Contact: John Horton 7777 E. Apache Street, Room A-217, Tulsa, Oklahoma, 74115

Phone: 918-838-5038

Fax: 918-838-5342




FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing