Government Contract | Texas
69th Street Wastewater Treatment Plant Tertiary Filter System

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information


Bid Alert No: 00000607653

Bid Title: 69th Street Wastewater Treatment Plant Tertiary Filter System

Agency Bid No. Title: N25846

Received Date: 06/23/2016

Close Date: 07/28/2016

Purchase Type: Not Stated

Delivery Point: Houston, Texas

Delivery Date: Not Stated

Special Notices: Pre-Bid Conference 07/13/2016 01:00 PM, Questions Due By 07/15/2016 05:00 PM, Bid Bond Required: , Performance Bond Required: 25%

Specifications

Specifications include, but are not limited to: Finish Coats (one or more): a) DFT = 2.5 to 4.0 mils (65-100 microns). b) Ameron 450 GL, Carboline 134 HG, VyGuard V54, Sherwin Williams Hi-Solids Polyurethane, or equal. 4. Total System DFT = 9-14 mils (225-600 microns). 5. Apply intermediate coat in excess of 4 mils (100 microns) DFT using the mist coat/full coat technique to completely cover the inorganic zinc primer and prevent bubbling of the epoxy or polyurethane finish coat. 6. Apply more than one finish coat as necessary to produce a finish with uniform color and texture. 7. If inorganic zinc primer is used as a pre-construction or shop-applied primer, and there are damaged or uncoated areas, spot blast the damaged areas with abrasive to an SSPC-SP 10 Near White Metal Standard and then coat with the specified material. chemical fumes and severe weathering. Use a primer, tie coat, or mist coat as recommended by the manufacturer. 1. Prime Coat (Tie Coat): Ameron 385, Carboline 893, Tnemec P66, VyGuard V75, Macropoxy 646 FC, or equal. 2. Finish Coats (2 or more): a) DFT = 2-4 mils (50-75 microns). b) Products: Ameron Amershield, Carbothane 134 HG, Tnemec 74, VyGuard V54, or equal. H. Section 7 Alkyd Enamel: Use a high quality, gloss, or semi-gloss, medium long oil alkyd finish with a minimum solids content of 49 percent by volume. Apply primer as recommended by manufacturer. 1. Prime Coat: a) DFT = 2-3 mils (50 to 75 microns). b) Products: Ameron 5105, Carboline AD29, Tnemec P4-55, VyGuard 13R29, kem Kromik Universal, or equal. 2. Finish Coats (2 or more): a) DFT = 2-4 mils (50-75 microns). b) Products: Ameron 5401HAS, Carboline GP62, Tnemec 2H, VyGuard V20, Sherwin Williams Indusrial Enamel, or equal. 3. Total System DFT = 4-7 mils (100-175 microns). I. System 8 Aluminum Metal Isolation: Use one coat of a high-build polyamide epoxy paint. 1. Products: Tnemec P66, Ameron 385, Carboline 893, Tnemec P66, VyGuard V75, Sherwin Williams Macropoxy 646 FC, or equal. 2. Total System DFT = 6-8 mils (150-200 microns).

Product Code: 91359

Agency Information


Issuing Agency: City of Houston

State: Texas

Agency Type: State and Local

Contact: Yesenia Chuca City Hall Annex, 900 Bagby st., Houston, Texas, 77002

Phone: 832-393-8727

Email: yesenia.chuca@houstontx.gov

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW