Government Contract | Kentucky

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information

Bid Alert No: 00000424479

Bid Title: 314-BALLARD-15-2984

Agency Bid No. Title: 152984

Received Date: 11/24/2015

Close Date: 12/11/2015

Purchase Type: Term: 05/13/2016

Delivery Point: Frankfort, Kentucky

Delivery Date: Not Stated

Special Notices: Bidder Preregistration


Specifications include, but are not limited to:Perform all work in accordance with the KentuckyTransportation Cabinet, Department of Highways 2012 Standard Specifications for Roadand Bridge Construction and applicable Supplemental Specifications, the StandardDrawings (Current Editions), this Note, and the attached detailed drawings forReplacement Ladders. Section references are to the Standard Specifications. This workconsists of the following: (1) Furnish all labor, materials, tools, and equipment for LadderReplacement; (2) Maintain and control traffic; and (3) Any other work specified as partof this contract;II. MATERIALS.A. Structural SteelASTM Material, A709 Grade 50 Structural Steel Plates and Shapes.Minimum structural steel strength, Fy = 50,000 psi.B. High Strength BoltsAll bolted connection shall be 3/4Diameter TYPE 1 (hot dipped galvanized)ASTM A325 strength bolts size as noted, nuts and washers. Diameter of theholes shall be 13/16. Furnish Type 1 bolts as described in AASHTO M164and ASTM A325.C. PaintSee section 607 of Standard Specification.III. CONSTRUCTION.A. Ladder Replacement. Complete Ladder Replacement as specified in thisspecial note, and shown in available existing PDF plan sheets, located inproject related information on Construction Procurements website.B. High Strength Bolts. Install all high strength bolted field connections using direct tension indicators (DTIs) in accordance with the StandardSpecifications and ASTM F959. Install DTIs under the bolt head with thebumps facing the underside of the bolt head. Place a hardened washer underthe nut tension connection from the nut side.C. Verifying Field Conditions. The Contractor shall field verify alldimensions, bolt patterns and locations before ordering any material. Newmaterial that is unsuitable due to variation in existing structure shall bereplaced at the Contractors expense.D. Ladder REMOVAL. Use a rivet buster or other approved means to removerivets connecting the existing ladder to the existing attachment angles asneeded, and then remove and dispose of the ladder sections being replaced.E. Ladder REPLACEMENT. Replace existing ladders in kind as detailed inexisting plan sheets, located in project related information on ConstructionProcurement website, with materials specified in this note. Reattach laddersto the existing attachment angles. Note that new brackets or angles may berequired. These items will be considered incidental to the work.

Bid Related Documents

Download Document


Download Amendment

Product Codes: 96884, 91458, 91366

Agency Information

Issuing Agency: Commonwealth of Kentucky - Transportation Cabinet

State: Kentucky

Agency Type: State and Local

Contact: Construction Procurement 702 Capital Ave, Room 383, Frankfort, Kentucky, 40601

Phone: 502-564-3500

Fax: 502-564-8961




FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing