Government Contract | New Jersey
24 Passenger MinibusWith Lifts

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information

Bid Alert No: 00000513501

Bid Title: 24 Passenger MinibusWith Lifts

Agency Bid No. Title: 1237

Received Date: 03/15/2016

Close Date: 04/08/2016

Purchase Type: Not Stated

Delivery Point:

Delivery Date: Not Stated

Special Notices: Questions Due By 03/18/2016, Small Business Set-Aside, Bidder Preregistration


Specifications include, but are not limited to:WINDOWS Windshield must be minimum (AS-1), operators side windows and rear door `window must be (AS-2) and all other windows must be minimum (AS-3) grade safety glass and must meet FMVSS 205, 212, and 219. To the extent permissible by Federal law, windows must be tinted with maximum 31% light reduction. Knockout type split sash windows must not be used. All exposed edges of glass must be banded or ground smooth. All windows must have black frame T-slide windows with upper opening. Sliding windows must comply with the NJDOT regulation, and must have no sharp edges or corners. All windows must be full emergency exit push out windows with quick release latch, per FMVSS 217. Windows at the ends that may not be feasible to be exit windows must be excluded from this requirement.INTERIOR BODY WALLS Interior body walls must be constructed of metal or Fiberglas reinforced plastic (FRP); and must be light gray or white in color. Bidders must submit samples of interior finish with pre-qualification documents. Front vertical panel above the operators compartment and the rear panel above the emergency door around the A/C evaporator, may be lined with heavy duty cloth hull or heavy duty vinyl liner. Chassis OEM interior color must be Medium Flint. The upper cab area including the ceiling must be covered with vinyl, Fiberglas, or ABS plastic material that coordinates the color of the OEM cab interior. ABS plastic used must be laminated to have rigidity equal to or better than that of the Fiberglass of the same thickness. If the seat mounting rails are made of steel then they must be primed and painted black to preclude rusting throughout the life of the vehicle. Aluminum rails must have natural finish. 3.18PASSENGER COMPARTMENT LIGHTING

Bid Related Documents

Download Document

Product Codes: 55640, 55600

Agency Information

Issuing Agency: Montclair State University

State: New Jersey

Agency Type: State and Local

Contact: Kyle Carter Office of Procurement Services, 855 Valley Road, Suite 112, Clifton, New Jersey, 07013

Phone: 973-655-6707

Fax: 973-655-5468

Email: carterk@mail.montclaire



FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing