Government Contract | New Jersey
2017 40 ARTICULATING AND TELESCOPING AERIAL TOWER AND BODY

Bid Information


Bid Alert No: 00000557981

Bid Title: 2017 40 ARTICULATING AND TELESCOPING AERIAL TOWER AND BODY

Agency Bid No. Title: Not Stated

Received Date: 04/29/2016

Close Date: 05/19/2016

Purchase Type: Not Stated

Delivery Point: Piscataway, New Jersey

Delivery Date: Not Stated

Special Notices: Bidder Preregistration, Bid Bond Required: 10%

Specifications

Specifications include, but are not limited to:GENERAL SPECIFICATION: 1.00 HEIGHT TO BOTTOM OF BASKET 40 1.01 WORKING HEIGHT 45 1.02 HORIZONTAL SIDE REACH 30 1.03 RATED CAPACITY OF PLATFORM 500 LBS. 1.04 STABILITY TEST, HORIZONTALLY EXTENDED, ON LEVEL GROUND750-LBS. 1.05 STABILITY TEST, HORIZONTALLY EXTENDED, ON 5-DEGREE SLOPE665LBS. 1.06 AERIAL TOWER WEIGHT 3600LBS. 1.07 AERIAL DEVICE SHALL BE PHOSPHATIZED, PRIMED AND PAINTED. UNIT STABILIZATION: 2.00 UNIT SHALL BE CAPABLE OF PASSING OSHA STABILIZATION TEST WITH ONE SET OF A FRAME OUTRIGGERS. ADDING BALLAST FOR STABILITY IS ACCEPTABLE, SUCCESSFUL BIDDER SHALL PROVIDE WEIGHT STUDY OF UNIT. 2.01 CONTROLS FOR EACH OUTRIGGER SHALL BE PROVIDED AT THE REAR OF THE UNIT, ONE EACH SIDE. SUBFRAME ASSEMBLY: 3.00 A SUBFRAME SHALL BE PROVIDED TO PROVIDE A COMPLETE STRUCTURAL UNIT FOR THE AERIAL, OUTRIGGERS AND BOOM REST TO THE TRUCK CHASSIS FRAME. OUTRIGGER TO BOOM INTERLOCK: 4.00 A COMPLETE OUTRIGGER TO BOOM INTERLOCK SHALL BE PROVIDED AND MUST FUNCTION AS FOLLOWS 4.01 OUTRIGGERS MUST BE FULLY SET DOWN AND WITH FIRM GROUND CONTACT BEFORE AERIAL WILL OPERATE. 4.02 AERIAL UNIT UPPER BOOM MUST BE FULLY STORED INTO THE BOOM REST BEFORE THE OUTRIGGERS CAN BE RAISED. 4.03 AN ELECTRIC CONTROL SELECTOR SWITCH SHALL BE PROVIDED AT THE REAR OF THE UNIT FOR SELECTING BETWEEN THE OUTRIGGER CONTROLS AND THE AERIAL CONTROLS 4.04 QTY. 2 - INCLINOMETER SHALL BE PROVIDED AT THE SIDE AND THEN THE REAR OF THE UNIT FOR LEVELING THE UNIT TO COMPLIANCE WITH ANSI A92.2-2015 REQUIREMENTS. 4.05 AN OUTRIGGER NOT STOWED COMPLETELY LIGHT SHALL BE PROVIDED ON THE TRUCK CAB DASH BOARD AND CLEARLY LABELED. PLATFORM/PLATFORM LEVELING: 5.00 ALUMINUM TUBE FRAME WORK PLATFORM IS END-MOUNT DESIGN AND TO MEASURE 24 X 48 X 42 AND HAVE CAPACITY OF 500 LBS. THE BASKET IS TO BE WALK IN TYPE WITH SAFETY GATE/CHAIN AT OPENING. ALUMINUM TREADPLATE FLOOR WITH NON SKID MATERIAL APPLIED TO SURFACE. 5.01 PLATFORM LEVELING IS CONTROLLED AUTOMATICALLY BY A MASTER/SLAVE CYLINDER ARRANGEMENT. THE PLATFORM LEVELING SYSTEM CAN BE MANUALLY ACTIVATED FROM THE UPPER AND LOWER CONTROLS TO ADJUST PLATFORM LEVELING, TO TIP THE PLATFORM FOR CLEAN-OUT OR TO EASE THE REMOVAL OF AN INJURED OPERATOR.

Bid Related Documents

Download Document

Product Code: 06505

Agency Information


Issuing Agency: Township of Piscataway

State: New Jersey

Agency Type: State and Local

Contact: Municipal Building, 455 Hoes Lane, Piscataway, New Jersey, 08854

Email: purchasing@piscatawaynj.org

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW