Government Contract | Texas
2016 Neighborhood Monument Signs Replacement

Bid Information


Bid Alert No: 00000494703

Bid Title: 2016 Neighborhood Monument Signs Replacement

Agency Bid No. Title: C-2016-0061

Received Date: 02/24/2016

Close Date: 03/09/2016

Purchase Type: Not Stated

Delivery Point: The Woodlands, Texas

Delivery Date: Not Stated

Special Notices: Site-Walk Mandatory, Warranty Required

Specifications

Specifications include, but are not limited to:SIGN A: Huntington WoodsDimensions Sign A: 10L x 6D x 26H - double faced cast stone sign Remove the existing sign, lentil and lower stone support area. Replace with new steel support lentil, including any necessary concrete forthe piers. Prep, prime and paint new lentil to match existing. Fit the new sign panel into the new lentil support, existing iron columnaccents and stone base, resecuring and/or adding new mortar to the seamsas needed. Provide and install new double-sided cast stone sign panel to match existingin color and size. Graphics on each monument are to be incised (routed or cast) with a depthof 3/8, primed and finished to match existing. Sealant AND anti-graffiti coating MUST BE applied to signs upon installation.SIGN B: Hickory OakDimensions Sign B: 10L x 6D x 26H - double faced cast stone sign Remove the existing sign, lower stone lentil support area and stone columnat the end of sign. Re-secure the lower steel lentil, including any necessary concrete for thepiers. Prep, prime and repaint the lower steel lentil support and support arms in asingle color, to match existing. Retrofit new sign panel into existing lentil, adding new mortar whereneeded. Provide and install new double-sided cast stone sign panel to match existingin color and size. Replace, repair or rebuild stone column at the end of sign as needed. Graphics are to be incised (routed or cast) with a depth of 3/8, primed andfinished to match existing font, graphics and color. Sealant AND anti-graffiti coating MUST BE applied to signs upon installation.SIGN C: Dunlin MeadowDimensions Sign C: 10L x 6D x 26H - double faced cast stone sign Remove the existing sign, lower stone lentil support area and stone columnat the end of sign. Re-secure the lower steel lentil, including any necessary concrete for thepiers. Prep, prime and repaint to match existing. Retrofit the new sign panel into the existing stone column accent/base,adding new mortar to the seams as needed. Provide and install new double-sided cast stone sign panel to match existingin color and size. Replace, repair or rebuild stone column at the end of sign as needed Graphics are to be incised (routed or cast) with a depth of 3/8, primed andfinished to match existing. Sealant AND anti-graffiti coating MUST BE applied to signs upon installation.

Bid Related Documents

Download Document

Product Codes: 91231, 96279, 91259

Agency Information


Issuing Agency: The Woodlands Township

State: Texas

Agency Type: State and Local

Contact: Nathan Wells

Email: nwells@thewoodlandstownship-tx.gov

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW